DEVICE/FUNCTION

SPEC

IMPORTANT FEATURES

POSSIBLE APPLICATION

Hydrostatic level measurement pressure transducer DMU 08 with Digital display and Junction box with pressure relief port.

DMU 08

Continuous electronic level measurement in tanks, wells, drilling holes, water reservoirs and rivers. Digital Display Choice of PUR or FEP cable, Voltage overload protection, short circuit proof, polarity protected, Junction box with pressure relief port. (EN61326)

• This transducer can be applied in tank farms for accurate volume and level measurement from very large tanks up to 15m height.

Capacitance level indicator with Ex approval CapFox
   

S74X

Continuous measurement in tanks and vessles in Ex zones, 0, 1 and 2, suitable for liquids, powders, electrically conducting or non-conducting media, pressurized or vacuum tanks. Digital display, Probe, Ex  pre-amplifier fitted in probe head. Intrinsically safe probe circuit provided the indicator is used with a type Ex 3640 021HF pre-amplifier and a rigid series 88 capacitance probe, The evaluation unit must be installed outside the hazardous area.1.5%FSD, IP30(EN60529)

• This indicator can be applied in tank farms for accurate volume and level measurement from very large tanks up to 12m height using the CNS05 flexible band electrode, areas with high risk of explosion. (Ex zones)

Compact Ultrasonic level indicator SonarFox for non- contact level measurement
  

Continuous non-contact level measurement, liquids, free flowing solids, A programming display can be plugged into the electronics block to calibrate the instrument without time consuming filling and emptying orocedures.0.2%FSD,Ultrasonic beam angle 6 deg. 1additional voltage free relay contact.

• especially for controlling Rakes and Gates in sewage plants and power plants, even materials with irregular surfaces.

Magnetostrictive level indicator MagFox
      

MMG 01

High accuracy continuous level indicator, (0.2m to 4m) ,low viscosity liquids that do not adhere to the sensing probe. Accuracy(better than 0.25mm),Float; for liquids 0.7g/cm3,Temperature compensated measurement, very short measuring intervals, zone 0 approval optional, Hart protocol optional,

• For tanks especially in process industries where liquid level is to be monitored accurately and remotely (Hart protocol)

Level switches, Minimelder, Minimelder(R) and Maximelder(R)
      

Signals min or max levels of water, heating oil EL, L, M, oil/water mixtures, neutral, non-viscous and non adhesive liquids in tanks. Control unit, height-adjustable float probe, adjustable switching level, Visual and Audible alarms.
Minimelder-R and Maximelder-R: similar to minimelder, but with 1 additional relay (normally open contact) for transmission of signal to external alarms or telecom control systems. For professional applications.
Magnetic float switch, test switch, oil resistant cable, IP68(EN60529).

Conductivity level switch
   

ELT8

Level switch, The built in relay can be programmed to either energize or de-energize  when the probe is in contact with the liquid, sensitivity must be adjusted according to the conductivity of the liquid. level control for filling and emptying,A min of 2 probe rods are required. Filling: The relay energises when the min probe loses contact with the liquid and de-energises when the liquid reaches the max probe. Emptying: The relay energises when the max and min probes are in contact with the liquid and de-energises when the min probe loses contact with the liquid.
Designed for use with electrically conducting liquids, non-viscous, non-adhesive, water, waste water, floor water probe, 2 additional voltage free relay contacts for switching functions, alarm indicator, probes ordered separately and chosen according to operating conditions (pg 43,44),

• Applicable in process control for switching control during filling (max) and emptying(min) operations. This control switch can actuate at max and min levels in small tanks (0m to 3m)

Thermostats TRT 200

TRT 200/711

Thermostat operating range 0/90oC, Tolerance Tmin+-5K Tmax+-3K, Switching differential 3+-1K, Probe element liquid filled Tmax = 120oC, Adjustment angle 270oC, OPTIONS other operating ranges, other capillary lengths, temp compensation, gas filled probe element.

• We can  use this to design a  custom temperature actuated switch for cooling systems or pumps, and valves etc.

TRT 200/712

Thermostat operating range 0/90oC, Tolerance Tmin+-5K Tmax+-3K, Switching differential 3+-1K, Probe element liquid filled Tmax = 120oC, Adjustment angle 270oC,OPTIONS other operating ranges, other capillary lengths, temp compensation, gas filled probe element.

• We can  use this to design a  custom temperature actuated switch for cooling systems or pumps, and valves etc.

TRT 200/716

Switch point between 30 and 100oC as required (factory preset), Switch point accuracy +-3K, switching differential 3+-1K, probe element liquid filled Tmax=120oC, OPTIONS other capillary lengths, temp compensation, gas filled probe element.

• We can  use this to design a  custom temperature actuated switch for cooling systems or pumps, and valves etc.

Safety Temperature switches

STB 400/971

Liquid filled temp switch with manual reset, switch point 100oC other switch points on request, accuracy +0 to -6K, probe element liquid filled Tmax = 135oC, OPTIONS other switch points, other capillary lengths, gold plated, temp compensation.

• We can  use this to design a  custom temperature safety switch for heating systems.

ETB 400/961

Adjustable liquid filled temp switch with manual reset, Range 90/110oC adjustable, calibration point 110oC, accuracy +0 to -6K, probe element liquid filled Tmax = 135oC, OPTIONS other capillary lengths, gold plated, temp compensation.

• We can  use this to design a  custom temperature safety switch for heating systems.

STW400/972

Pre-adjusted liquid filled temp switch with automatic reset, switch point 100oC other switch points on request, accuracy +0 to -6K, switching differential 10 to 15K, probe element liquid filled Tmax = 135oC, OPTIONS other switch points, other capillary lengths, gold plated, temp compensation.

• We can  use this to design a  custom temperature safety switch for heating systems.